Fortinet FortiGate-800 User Manual download pdf (Page 49)

NAT/Route mode installation Completing the configuration

FortiGate-800 Installation and Configuration Guide 49

Completing the configuration

Use the information in this section to complete the configuration of the FortiGate unit.

Configuring the DMZ interface

Use the following procedure to configure the DMZ interface:

1 Log into the web-based manager.

2 Go to System > Network > Interface.

3 Choose the dmz interface and select Modify .

4 Change the IP address and Netmask as required.

5 Select Apply.

Configuring interfaces 1 to 4

Use the following procedure to configure the eight user-defined interfaces:

1 Log into the web-based manager.

2 Go to System > Network > Interface.

3 Choose a user-defined interface and select Modify .

Select from port1 to port4.

4 Change the IP address and Netmask as required.

5 Select Apply.

Setting the date and time

For effective scheduling and logging, the FortiGate system date and time must be

accurate. You can either manually set the system date and time or configure the

FortiGate unit to automatically keep its time correct by synchronizing with a Network

Time Protocol (NTP) server.

For information about setting the FortiGate system date and time, see “Setting system

date and time” on page 169.

Changing antivirus protection

To change how antivirus protection to protects users on your internal network from

downloading a virus from the Internet:

1 Go to Firewall > Policy > Internal->External.

2 Select Edit to edit this policy.

3 Select Anti-Virus & Web filter to enable antivirus protection for this policy.

4 Select a different Content Profile to change how antivirus protection is applied for this

policy.

For a description of each of the content profiles, see “Content profiles” on page 218.

5 Select OK to save the changes.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 335 336

No comments

Fortinet FortiGate-800 User Manual Page 49