Fortinet FortiGate 4000 User Manual download pdf (Page 34)

34 Fortinet Inc.

Rear panel features Getting started

10/100 out of band management module

The 10/100 out of band management module provides dedicated ethernet connection

to manage each FortiBlade-4010 module installed in the FortiGate-4000 chassis. This

out of band connection is not shared by other network connections. The 10/100 out of

band management module contains two 10/100 ethernet interfaces that connect to the

management interface of each FortiBlade-4010 module.

Figure 11: 10/100 out of band management module

Table 6: Management module controls

Button Description

On/Off switch Turns the management module on and off. The management

module must be turned on to establish a serial connection to

the CLI of each FortiBlade-4010 module.

ID dial Set to 0.

Console port Serial connection to the CLI of each FortiBlade-4010 module.

Table 7: KVM switch module LED

LED State Description

ERR Off Normal operation.

Yellow System fault. Contact Fortinet Technical Support.

Note: You can connect to the LAN 1 connector or to the LAN 2 connector but not both.

Table 8: 10/100 out of band management module LEDs

LED State Description

Interface LEDs

Amber The correct cable is in use and the connected equipment has

power.

Flashing

Amber

Network activity at this interface.

Green The interface is connected at 100 Mbps.

LAN 2LAN 1

LAN 1

LAN 2

Mounting Knot Mounting Knot

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 331 332

No comments

Fortinet FortiGate 4000 User Manual Page 34